Monitor Settings<\/strong><\/p>\n\n\n\n Set the \u201cActivate\u201d<\/strong> option to On and fill in the fields:<\/p>\n\n\n\n Name<\/strong>\u00a0\u2013 enter a monitor name. You use the IP address as the monitor name.<\/p>\n\n\n\n Type<\/strong>\u00a0\u2013 select IP.<\/p>\n\n\n\n Checks Interval<\/strong>\u00a0\u2013 select the IP address checking interval. Free monitors work every 2 hours. The interval for paid monitors starts with 1 minute.<\/p>\n\n\n\n Region <\/strong>\u2013 select the region: US East (N. Virginia) or Europe (Ireland). GlockApps uses two servers located in two regions and using different IP addresses.<\/p>\n\n\n\n IP Settings<\/strong><\/p>\n\n\n\n IP\u00a0<\/strong>\u2013 enter the IP address that will be monitored.<\/p>\n\n\n\n To add more than one IP address, turn the “Add multiple monitors at once”<\/strong> to On and paste the list of IP addresses. GlockApps will create a monitor for each IP on the list.<\/p>\n\n\n\n Tags<\/strong><\/p>\n\n\n\n Enter a tag for the monitor (optional). Tags allow you to filter the monitors.<\/p>\n\n\n\n Alerts<\/strong><\/p>\n\n\n\n Set\u00a0\u201cActivate\u201d<\/strong>\u00a0to On if you want to receive alerts when a blacklisting issue is detected.<\/p>\n\n\n\n Alerts can be sent via one or multiple channels set up in Alert Channels. The default channel is set up via email.<\/p>\n\n\n\n Select the alert channel(s) and click \u201cSave\u201d<\/strong>.<\/p>\n\n\n\n What Do the Monitor Statuses Mean?<\/strong><\/p>\n\n\n\n When the monitor is working, it shows the status of the IP address on the progressive bar. <\/p>\n\n\n\n Click on the monitor name to get a detailed report.<\/p>\n\n\n\n The meanings of the statuses are:<\/p>\n\n\n\n Clean<\/em> – the IP address is not found on any of the blacklists available in the GlockApps database<\/p>\n\n\n\n Blacklisted in XX<\/em> – the IP address is found on XX blacklists\u00a0<\/p>\n\n\n\n Inactive<\/em> – monitor is inactive<\/p>\n\n\n\n When the IP address is blacklisted, the information about the blacklists that have the IP on record is shown in the Response Text area. There you can find the URL of the page that gives detailed information about the listing. <\/p>\n\n\n\n The Events<\/strong> panel provides a detailed log of the IP checks. Here you can get the following information:<\/p>\n\n\n\n Event<\/strong> – shows the IP status for the indicated date and time (Clean or Blacklisted)<\/p>\n\n\n\n Date<\/strong> – shows the date and time of the event (IP check)<\/p>\n\n\n\n Duration<\/strong> – shows how much time the event status lasts. The tool shows the event status one time per day if it didn\u2019t change. The time when the event status is shown is not fixed. It is calculated approximately. But if a new check detects the status change, it shows the new status immediately.<\/p>\n\n\n\n Response<\/strong> – shows the response returned by the IP monitor.\u00a0<\/p>\n\n\n\n![\"\"](\"https:\/\/glockapps.com\/help\/wp-content\/uploads\/2025\/01\/create-ip-uptime-monitor.png\")
![\"\"](\"https:\/\/glockapps.com\/help\/wp-content\/uploads\/2025\/01\/ip-uptime-monitor-events.png\")